173 research outputs found

    Measurement of shower development and its Moli\`ere radius with a four-plane LumiCal test set-up

    Get PDF
    A prototype of a luminometer, designed for a future e+e- collider detector, and consisting at present of a four-plane module, was tested in the CERN PS accelerator T9 beam. The objective of this beam test was to demonstrate a multi-plane tungsten/silicon operation, to study the development of the electromagnetic shower and to compare it with MC simulations. The Moli\`ere radius has been determined to be 24.0 +/- 0.6 (stat.) +/- 1.5 (syst.) mm using a parametrization of the shower shape. Very good agreement was found between data and a detailed Geant4 simulation.Comment: Paper published in Eur. Phys. J., includes 25 figures and 3 Table

    Performance of fully instrumented detector planes of the forward calorimeter of a Linear Collider detector

    Get PDF
    Detector-plane prototypes of the very forward calorimetry of a future detector at an e+e- collider have been built and their performance was measured in an electron beam. The detector plane comprises silicon or GaAs pad sensors, dedicated front-end and ADC ASICs, and an FPGA for data concentration. Measurements of the signal-to-noise ratio and the response as a function of the position of the sensor are presented. A deconvolution method is successfully applied, and a comparison of the measured shower shape as a function of the absorber depth with a Monte-Carlo simulation is given.Comment: 25 pages, 32 figures, revised version following comments from referee

    3-D struktura serumske paraoksonaze 1 objašnjava njezinu aktivnost, stabilnost, topljivost i kristalizaciju

    Get PDF
    Serum paraoxonases (PONs) exhibit a wide range of physiologically important hydrolytic activities, including drug metabolism and detoxification of nerve gases. PON1 and PON3 reside on high-density lipoprotein (HDL) (the “good cholesterol”), and are involved in the alleviation of atherosclerosis. Members of the PON family have been identified not only in mammals and other vertebrates, but also in invertebrates. We earlier described the first crystal structure of a PON family member, a directly-evolved variant of PON1, at 2.2 Å resolution. PON1 is a 6-bladed beta-propeller with a unique active-site lid which is also involved in binding to HDL. The 3-D structure, taken together with directed evolution studies, permitted analysis of mutations which enhanced the stability, solubility and crystallizability of this PON1 variant. The structure permits a detailed description of PON1’s active site and suggests possible mechanisms for its catalytic activity on certain substrates.Serumske paraoksonaze (PONs) imaju široki raspon fiziološki važnih hidrolitičkih aktivnosti uključujući metabolizam lijekova i detoksikaciju nervnih plinova. PON1 i PON3 smještene su na lipoproteinima visoke gustoće (engl. high-density lipoprotein; HDL - “dobri kolesterol”) i uključene su u ublažavanje ateroskleroze. Članovi skupine PON identificirani su ne samo u sisavaca i drugih kralježnjaka već i kod beskralješnjaka. Prije smo opisali prvu kristalnu strukturu člana PON skupine, direktno razrađenu varijantu PON1 pri rezoluciji 2,2 Å. PON1 je beta-propeler sa šest lopatica s jedinstvenim poklopcem aktivnog mjesta, koji je tako|er uključen u vezanje na HDL. 3-D struktura, gledana zajedno s direktnim razvojnim istraživanjima, omogućila je analizu mutacija koje povećavaju stabilnost, topljivost i kristalizaciju te PON1 varijante. Struktura dopušta detaljan opis aktivnog mjesta PON1 i sugerira moguće mehanizme za njezinu katalitičku aktivnost prema odre|enim supstratima

    Low HDL cholesterol is associated with increased atherogenic lipoproteins and insulin resistance in women classified with metabolic syndrome

    Get PDF
    Both metabolic syndrome (MetS) and elevated LDL cholesterol (LDL-C) increase the risk for cardiovascular disease (CVD). We hypothesized that low HDL cholesterol (HDL-C) would further increase CVD risk in women having both conditions. To assess this, we recruited 89 women with MetS (25-72 y) and LDL-C ≥ 2.6 mmol/L. To determine whether plasma HDL-C concentrations were associated with dietary components, circulating atherogenic particles, and other risk factors for CVD, we divided the subjects into two groups: high HDL-C (H-HDL) (≥ 1.3 mmol/L, n = 32) and low HDL-C (L-HDL) (< 1.3 mmol/L, n = 57). Plasma lipids, insulin, adiponectin, apolipoproteins, oxidized LDL, Lipoprotein(a), and lipoprotein size and subfractions were measured, and 3-d dietary records were used to assess macronutrient intake. Women with L-HDL had higher sugar intake and glycemic load (P < 0.05), higher plasma insulin (P < 0.01), lower adiponectin (P < 0.05), and higher numbers of atherogenic lipoproteins such as large VLDL (P < 0.01) and small LDL (P < 0.001) than the H-HDL group. Women with L-HDL also had larger VLDL and both smaller LDL and HDL particle diameters (P < 0.001). HDL-C was positively correlated with LDL size (r = 0.691, P < 0.0001) and HDL size (r = 0.606, P < 0.001), and inversely correlated with VLDL size (r = -0.327, P < 0.01). We concluded that L-HDL could be used as a marker for increased numbers of circulating atherogenic lipoproteins as well as increased insulin resistance in women who are already at risk for CVD

    Back to the Shop Floor: Behavioural Insights From Workplace Sociology

    Get PDF
    This article compares insights into decision-making and behaviour developed by Kahneman and Tversky in behavioural economics with the main findings from studies of pay incentives in workplace sociology in the middle decades of the 20th century. The article shows how many of the insights offered by behavioural economists, such as loss aversion, were anticipated and considered by the workplace sociologists. It is argued that the sociological studies offer deeper and more convincing accounts of worker behaviour through a better understanding of the role of social structure, context, and social processes in framing and influencing action

    Modulation of paraoxonases during infectious diseases and its potential impact on atherosclerosis

    Get PDF

    Higgs Physics at the CLIC Electron-Positron Linear Collider

    Get PDF
    The Compact Linear Collider (CLIC) is an option for a future e+e- collider operating at centre-of-mass energies up to 3 TeV, providing sensitivity to a wide range of new physics phenomena and precision physics measurements at the energy frontier. This paper is the first comprehensive presentation of the Higgs physics reach of CLIC operating at three energy stages: sqrt(s) = 350 GeV, 1.4 TeV and 3 TeV. The initial stage of operation allows the study of Higgs boson production in Higgsstrahlung (e+e- -> ZH) and WW-fusion (e+e- -> Hnunu), resulting in precise measurements of the production cross sections, the Higgs total decay width Gamma_H, and model-independent determinations of the Higgs couplings. Operation at sqrt(s) > 1 TeV provides high-statistics samples of Higgs bosons produced through WW-fusion, enabling tight constraints on the Higgs boson couplings. Studies of the rarer processes e+e- -> ttH and e+e- -> HHnunu allow measurements of the top Yukawa coupling and the Higgs boson self-coupling. This paper presents detailed studies of the precision achievable with Higgs measurements at CLIC and describes the interpretation of these measurements in a global fit.The Compact Linear Collider (CLIC) is an option for a future e+e{\mathrm{e}^{+}}{\mathrm{e}^{-}} collider operating at centre-of-mass energies up to 3TeV3\,\text {TeV} , providing sensitivity to a wide range of new physics phenomena and precision physics measurements at the energy frontier. This paper is the first comprehensive presentation of the Higgs physics reach of CLIC operating at three energy stages: s=350GeV\sqrt{s} = 350\,\text {GeV} , 1.4 and 3TeV3\,\text {TeV} . The initial stage of operation allows the study of Higgs boson production in Higgsstrahlung ( e+eZH{\mathrm{e}^{+}}{\mathrm{e}^{-}} \rightarrow {\mathrm{Z}} {\mathrm{H}} ) and WW{\mathrm{W}} {\mathrm{W}} -fusion ( e+eHν ⁣eνˉ ⁣e{\mathrm{e}^{+}}{\mathrm{e}^{-}} \rightarrow {\mathrm{H}} {{\nu }}_{\!\mathrm{e}} {\bar{{\nu }}}_{\!\mathrm{e}} ), resulting in precise measurements of the production cross sections, the Higgs total decay width ΓH\varGamma _{{\mathrm{H}}} , and model-independent determinations of the Higgs couplings. Operation at s>1TeV\sqrt{s} > 1\,\text {TeV} provides high-statistics samples of Higgs bosons produced through WW{\mathrm{W}} {\mathrm{W}} -fusion, enabling tight constraints on the Higgs boson couplings. Studies of the rarer processes e+ettˉH{\mathrm{e}^{+}}{\mathrm{e}^{-}} \rightarrow \mathrm{t} {\bar{\mathrm{t}}} {\mathrm{H}} and e+eHHν ⁣eνˉ ⁣e{\mathrm{e}^{+}}{\mathrm{e}^{-}} \rightarrow {\mathrm{H}} {\mathrm{H}} {{\nu }}_{\!\mathrm{e}} {\bar{{\nu }}}_{\!\mathrm{e}} allow measurements of the top Yukawa coupling and the Higgs boson self-coupling. This paper presents detailed studies of the precision achievable with Higgs measurements at CLIC and describes the interpretation of these measurements in a global fit
    corecore